Ggd 1-3 Low Voltage Switchgear Lvsg Power Distribution Box Panel

• Customization: Available
• Type: Distribution Metering Box
• Structure: Protection
• Model NO.: GGD
• Form: Partly-welded Type
• Operation Voltage: Low Voltage
• Size: 2 Uint
• Application Range: Power Plants
• Shell Material: Steel Plate
• Shell Protection Grade: IP55
• Brand: CHINT
• Transport Package: Wooden Box
• Specification: as your requerts
• Trademark: Chuang Xing
• Origin: China
• Production Capacity: 7000 Pieces Per Year
• Package Size: 1000.00cm * 600.00cm * 2200.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Description

 

model	Rated voltage (V)	Rated Current(A)		Rated short circuit break current (kA)	Rated short time withstand curent (1s) kA(1s)(kA)	Rated peak withstand current(kA)
GGD1	380	A	1000	15	15	30
		B	600(630)
		C	400
GGD2	380	A	1500(1600)	30	30	60
		B	1000
		C	600
GGD3	38	A	3150	50	50	150
		B	2500
		C	2000

GGD type low voltage fixed switchgear is suitable for three-phase AC 50/60HZ, max voltage AC 690V, rated current to 3150A power distribution system , it is widely used in power plants, substations, industrial and mining enterprises etc energy consumer and using for power, lighting ,control motor starting and distribution equipment for electrical energy conversion, distribution and control purposes.

GGD type LV low voltage distribution cabinet is based on the higher charge of energy department and the power consumers and design department requirements , the principle of safety, economy, reasonable, reliable design of new type low-voltage distribution cabinet . The products with high breaking capacity, dynamic thermal stability, electrical flexible, convenient combination, a series of practical., novel structure, high protection level, which can be used as a replacement of low voltage switchgear.GGD AC low voltage distribution cabinet is accords with the standards IEC60439 Low voltage complete switch device and Control Equipment etc. 

working Features

• Ambient temperature: -5 ºC ~ + 40 ºC, and the average temperature within 24h not exceed + 35 ºC.
• Altitude: not exceed 2000m.
• The ambient air temperature of + 40 ºC not more than 50%; at lower temperaturescan have a higher relative humidity on (eg: + 20 ºC at 90%), taking into account the change in temperature allows the generation of a moderate condensation.
• Equipment installation and the vertical gradient should not exceed 5 °
• Equipment should be installed in the absence of severe vibration, shock-free and corrosion-freeplace

Product pictures

 

Company Profile

Jiangxi Chuanxing is an enterprise mainly engaged in the production and supply of electricity and heat, and its main business scope includes construction engineering, electrical installation services, building intelligent system design, installation, maintenance and testing of hydroelectric power generation, transmission, power supply and power receiving facilities. In addition, the company is also involved in wind power generation technical services, power generation technical services, solar power generation technical services, engineering management services, general machinery and equipment installation services, municipal facilities management, photovoltaic power generation equipment leasing, and sales of generators and generator sets.

Notes
Tell us the following information before ordering

1.The main circuit distribution system diagram and floor plan, rated working voltage, rated working current, protection device setting current and necessary technical parameters
2.Indicate the specifications of the incoming and outgoing cables.
3.The type, specification and quantity of the main electrical components in the switchgear.
4.If a bus bridge or bus duct is required between switch cabinets or incoming cabinets, specific required data such as span and height from the ground shall be indicated.
5.When the switchgear is used under special environmental conditions, it should be specified in detail at the time of ordering
6.Switchgear surface color and other specific requirements.

FAQ

1,What is your MOQ?
  Our MOQ is 1 piece.

 2,How long is your delivery lead time ?
It depends on your product requirement and quantity . 

3, What time I can get the quote ?
   We ususally quote within 24 hours after we get your inquiry .
4,How can we guarantee quality?
 Always make a final Inspection before shipping.