Factory Supply Armed Removeable AC Metal-Enclosed Switchgear Metal-Clad Enclosed Electrical Power Distribution Equipment

• Customization: Available
• Type: Distribution Metering Box
• Structure: Protection
• Model NO.: KNY28-12
• Form: Partly-welded Type
• Operation Voltage: High Voltage
• Size: 2 Uint
• Application Range: Power Plants
• Shell Material: Steel Plate
• Shell Protection Grade: IP30
• Brand: CHINT
• Transport Package: Wooden Box
• Specification: as your requirements
• Trademark: Chuang Xing
• Origin: China
• Production Capacity: 7000 Pieces Per Year
• Package Size: 650.00cm * 1500.00cm * 2300.00cm
• Package Gross Weight: 1200.000kg

Product Description

 

Product Description

		Unit
Rated voltage		kV	3	6	7.2
Rated frequency		Hz	50
Circuit breaker current rating		A	630	1250	1600	2000	2500	3150
Switchgear rated current		A	630	1250	1600	2000	2500	3150
Rated short-time withstand current (4S)		kA	16	20	25	31.5	40	50
Rated peak withstand current		kA	40	50	63	80	100	125
Rated short-circuit interrupting current		kA	16	20	25	31.6	40	50
Rated short-circuit closing current		kA	40	50	63	80	100	125
Rated insulation level	1min Power frequency withstand voltage	kV	24		32		42
	Withstand voltage for lightning impulses	kV	40		60		75
Ingress protection			The enclosure is IP4X, and the isolation room, circuit breaker chamber door is IP2X when open

KYN28 indoor metal-clad withdrawable switchgear(hereafter short as switchgear) is a complete power distribution device for 3.6~24KV, 3 phase AC 50Hz, single bus sectionalized system. It is main used for power transmission of middle/small generators in power plants, power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc, so as to control, protect and monitor the system. The switchgear meets IEC298, GB3906-91. In addition to be used with domestic VS1 vacuum circuit breaker, it can be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc. It is truly a power distribution deviece with good performance.
 

working conditions

• Ambient temperature: Ambient air temperature: upper limit +40°C, lower limit -10°C;
• Relative temperature: the daily average is not more than 95%, and the monthly average is not more than 90%;
•  Altitude: no more than 1000m;
• seismic intensity does not exceed 8 degrees;
• No fire, explosion hazard, serious pollution, chemical corrosion and severe vibration. When the conditions of use exceed the above-mentioned scope, the user shall negotiate with the Company to determine the permissible scope and technical measur

Model and meaning

Some factory pictures


 

Certifications

 

 

Company Profile

Jiangxi Chuanxing is an enterprise mainly engaged in the production and supply of electricity and heat, and its main business scope includes construction engineering, electrical installation services, building intelligent system design, installation, maintenance and testing of hydroelectric power generation, transmission, power supply and power receiving facilities. In addition, the company is also involved in wind power generation technical services, power generation technical services, solar power generation technical services, engineering management services, general machinery and equipment installation services, municipal facilities management, photovoltaic power generation equipment leasing, and sales of generators and generator sets.

Notes
Tell us the following information before ordering

1.The main circuit distribution system diagram and floor plan, rated working voltage, rated working current, protection device setting current and necessary technical parameters
2.Indicate the specifications of the incoming and outgoing cables.
3.The type, specification and quantity of the main electrical components in the switchgear.
4.If a bus bridge or bus duct is required between switch cabinets or incoming cabinets, specific required data such as span and height from the ground shall be indicated.
5.When the switchgear is used under special environmental conditions, it should be specified in detail at the time of ordering
6.Switchgear surface color and other specific requirements.

FAQ

1,What is your MOQ?
  Our MOQ is 1 piece.

 2,How long is your delivery lead time ?
It depends on your product requirement and quantity . 

3, What time I can get the quote ?
   We ususally quote within 24 hours after we get your inquiry .
4,How can we guarantee quality?
 Always make a final Inspection before shipping.