| Customization: | Available |
|---|---|
| Application: | Power, Electronic |
| Phase: | Three |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Produtct details
| Form | Rated Capacity (KVA) | Connection group label number | Voltage Combination (KV) | No-load loss (W) | Dy-load loss (W) | Yy-load loss (W) | No-load current (%) | Short circuit impedance(%) | ||
| High Pressure | Tapping Range | Low Pressure | ||||||||
| S13-M-30 | 30 | Yyno or Dyn11 | 10 | ±5% | 0.4 | 80 | 630 | 600 | 1.5 | 4 |
| S13-M-50 | 50 | 6.3 | 100 | 910 | 870 | 1.3 | ||||
| S13-M-63 | 63 | 6 | ±2*2.5% | 110 | 1090 | 1040 | 1.2 | |||
| S13-M-80 | 80 | 11 | 130 | 1310 | 1250 | 1.2 | ||||
| S13-M-100 | 100 | 150 | 1580 | 1500 | 1.1 | |||||
| S13-M-125 | 125 | 170 | 1890 | 1800 | 1.1 | |||||
| S13-M-160 | 160 | 200 | 2310 | 2200 | 1 | |||||
| S13-M-200 | 200 | 240 | 2730 | 2600 | 1 | |||||
| S13-M-250 | 250 | 290 | 3200 | 3050 | 0.9 | |||||
| S13-M-315 | 315 | 340 | 3830 | 3650 | 0.9 | |||||
| S13-M-400 | 400 | 410 | 4520 | 4300 | 0.8 | |||||
| S13-M-500 | 500 | 480 | 5410 | 5150 | 0.8 | |||||
| S13-M-630 | 630 | 570 | 6200 | 0.6 | 4.5 | |||||
| S13-M-800 | 800 | 700 | 7500 | 0.6 | ||||||
| S13-M-1000 | 1000 | 830 | 10300 | 0.6 | ||||||
| S13-M-1250 | 1250 | 970 | 12000 | 0.5 | ||||||
| S13-M-1600 | 1600 | 1170 | 14500 | 0.5 | ||||||
| S13-M-2000 | 2000 | 1550 | 18300 | 0.4 | 5 | |||||
| S13-M-2500 | 2500 | 1830 | 21200 | 0.4 | ||||||
Features
1. The transformer core is made of imported high quality cold rolled silicon steel sheet stacked together, which greatly reduces the no-load loss and no-load current, and the core is tied to ensure the tightness of the core and reduce the noise.
2. high and low voltage winding with oxygen-free copper winding, low voltage winding 500kVA and below using double-layer round simple structure, 630kVA and above using double spiral or four spiral structure, high voltage winding using multi-layer round simple structure.
3. Transformer linkage group adopts Dyn11, reduce the impact of harmonics on the grid, change the company's R & D and production of the S11-M series of fully sealed oil-filled power transformers with
Good power supply quality. There are low loss, low noise, high efficiency advantages, can get good energy saving effect.
4, the transformer is fully sealed structure, prolong the service life, free hanging heart, free maintenance pollution. Fully sealed transformer and ordinary oil-immersed transformer, compared with the cancellation of the oil storage cabinet, oil volume changes by the corrugated oil tank corrugated sheet of the elasticity to automatically adjust the compensation.
5. The measured noise value is lower than the standard. Isolated from the air, to prevent and slow down the oil deterioration and insulation aging, enhance the operation of reliable This series of cross-pressure device after normal transport, do not need to do the hanging heart check, you can install the relevant parts and components of the sex, normal operation free of maintenance. Conduct acceptance project test, qualified can be put into operation.
Working condition.
Highest air temperature +40ºC;
Highest daily average air temperature+30ºC;
Highest annual average air temperature +20ºC;
Lowest outdoor air temperature -25ºC.
Jiangxi Chuanxing is an enterprise mainly engaged in the production and supply of electricity and heat, and its main business scope includes construction engineering, electrical installation services, building intelligent system design, installation, maintenance and testing of hydroelectric power generation, transmission, power supply and power receiving facilities. In addition, the company is also involved in wind power generation technical services, power generation technical services, solar power generation technical services, engineering management services, general machinery and equipment installation services, municipal facilities management, photovoltaic power generation equipment leasing, and sales of generators and generator sets.
NOTICE !
Please tell us the imformation before your ording. The imformation include:
1. Prefabricated substation type;
2. Transformer model and capacity;
3. High and low voltage circuit main wiring scheme;
4. Types and parameters of electrical components with special requirements;
1, What is your MOQ?
Our MOQ is 1 piece.
2,How long is your delivery lead time ?
It depends on your product requirement and quantity .
3,What time I can get the quote ?
We ususally quote within 24 hours after we get your inquiry .
){kind=link}